Veća je od informacija

Item Type:

Handwheel

Encoder Specification:

Power Supply Voltage:

DC5±10%

Pulse Number:

100PPR

Output Voltage (VH) (Maximum):

3.8V

Output Voltage (VL) (Minimum):

0.3V

Output Current:

80mA

Model Format:

A.B.A-.B-

Output Resistance:

DIFF

Response Speed:

5KHz

Current Consumption:

50mA

Starting Torque (Maximum):

150g

Axial Volume (minimum):

R 2kg±10%

Rotation Life (minimum):

1KKR

Operating Temperature:

0/+50

Storage Temperature:

-10/+70

Wiring Table Specification:

 

Output Signal:

A  B V0 V+ A- B-

Terminal-Line Driver A:

1 2 3 4 5 6

Instruction:

 

YP800-100B-1L represents a large handwheel with a diameter of :

80mm, the output is 100 pulses, the working voltage is 5V, and the output mode is long-line output. This product is suitable for CNC machine tools, two orthogonal output signals (A, B), 100 pulses , The output mode is long-line drive. :

Package List:

1 x Handwheel :

1 x Instruction :

3 x Terminal :

Note:

1. The encoder is a precision instrument. It is forbidden to knock, drop, bump, etc. during installation. Improper installation or use will affect the performance and service life of the encoder. :

2. Pay attention to the shaft load of the encoder during installation, and must not exceed the limit load. :

3. Be careful not to exceed the limit speed of the encoder during use. If the speed exceeds the limit, the electrical signal of the encoder may be lost. :

4. The wiring must be correct. If the wiring error will cause damage to the internal circuit of the encoder, the unused cable shall be insulated before the initial starting. :